3 Ideas To Consider When Repairing Hose Reels

Hose reel can be found easily in almost any home as this helps in keeping garden hoses clean and neat. But sometimes, it gets damaged or punctured because of some reasons. There are two options that you can do in case this happens to you; either buy a replacement of its essential parts or, do repairs at home.

In regards of the category of hose reel you purchase, there’s always a time in which it will start to leak through its joining points or, it may be punctured. As a matter of fact, by following the tips listed below, doing repairs of the hose reel will be easier than you thought regardless if it is a hose reel cart, retractable hose reel or even the wall mounted units.

Tip number 1. Check all connections – generally, hose reels have around 5 different connectors located on the leader hose, beginning of the faucet, garden hose, out tube and in tube. Say for example that your hose has leak, then you should try tightening every connection before opting out for an expensive replacement or repairs. There are instances that loose connector is only what causing the problem. While you are repairing the connectors, you should be certain to line up the threads to be able to avoid any damage to it.
Getting To The Point – Tips

Tip number 2. Change defective O-rings – in different types of reels, this is actually one of the common repair steps needed to be done. When the o-rings are used for a long time, it creates the possibility of making it cracked or dry. It is also easy to buy replacement for this one because nearly any hardware store or online shop has one. On the other hand, just before you buy one, you should take a look at the website of the manufacturer or the guidebook to be able to confirm which size of o-ring is recommended for that model you have at home.
Why People Think Gardening Are A Good Idea

Tip number 3. Take out the panel – detach the hose as well as the reel by the time you have turned off the water supply to the hose reel. Then, you should use a screwdriver in order to take out 4 bolts that are located on the knob side of case and put them in a secure place. Pull away the shield from case once done, this is to uncover the entire panel.

These are only 3 simple tips that can be a big help when you are doing a DIY repair on your hose reel. On the other hand, you should consider buying a new one in the event that the problem still exists after all the efforts you’ve put in it.